LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Exterior Trim >> Repair Instructions >> Molding/Nameplate Replacement - Exterior Trim >> Removal Procedure

Removal Procedure

Remove the emblem or the molding:

  1. Apply masking tape to the body side border of the emblem or the molding in order to protect the body from scratches. The tape will also aid in aligning the moldings during installation.
  2. Use J 41409 or a 0.8 mm (0.03 in) fishing line in order to cut through the adhesive material. See Figure.
scientia non olet · About LEMON Manuals