LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Exterior Trim >> Repair Instructions >> Blackout Transfer Replacement - Front Door >> Removal Procedure

Removal Procedure

  1. Remove the door trim panel. Refer to TRIM PANEL REPLACEMENT -- DOOR . .
  2. Remove the door window run channel from the door frame.
  3. Remove the emblem from the door. Refer to Molding/Nameplate Replacement - Exterior Trim . Apply the transfers in a clean environment where dust or fibers will not interfere with proper adhesion.
  4. Use a heat gun or other suitable tool in order to heat the transfer.
    Fig 1: Removing Door Trim Panel
    G02506494Courtesy of GENERAL MOTORS CORP.
  5. Slowly peel the transfer from the door.
    Fig 2: Removing Transfer From Door
    G02506495Courtesy of GENERAL MOTORS CORP.