LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Roof Drip Molding Replacement - Rear >> Removal Procedure

Removal Procedure

  1. Use the appropriate drill bit in order to drill the head from the rivet (2).
  2. Remove the rivets (2).
  3. Remove the roof drip molding (1).
    4. Fig 1: Removing & Installing Rear Roof Drip Molding
    G02507175Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals