Theft Deterrent System
- Component Locator
- Diagnostic Information And Procedures
- Diagnostic Tests
- DTC B2947: Short To Ground On Passlock Sensor Power Circuit
- DTC B2948: Battery Voltage Sensed After Shut Down
- DTC B2957: BCM Signal Input Less Than 0.4 Volt After Ignition CRANK
- DTC B2958: BCM Signal Input Greater Than 4.9 Volts After Ignition CRANK
- DTC B2960: Invalid Passlock™ Code Sensed
- DTC B3031: BCM Learn Mode Does Not See Valid Passlock™ Sensor Code
- DTC B3033: BCM Reads A Tamper Code From Passlock™ Sensor
- DTC P1626: BCM To PCM Communication
- DTC P1631: PCM Did Not Receive A Valid Password
- Symptom Testing
- Repair Instructions
- Description And Operation
- Special Tools And Equipment