Removal Procedure
- Remove the bucket seat from the seat risers. Refer to Seat Replacement - Bucket .
- Remove the screw from the recliner lever handle if equipped. See Fig 1.
- Remove the lever from the recliner if equipped.
- Remove the lumbar knob and clip if equipped.
- Remove the J-hooks that retain the seat cushion cover to the seat cushion frame.NOTE: Note the positions of the hog rings for reassembly.
- Remove the hog rings that retain the seat cushion cover to the seat cushion frame. See Fig 2.
- Remove the seat cushion cover and pad from the seat cushion frame. See Fig 3.
- Remove the seat cushion cover from the pad.