LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat System >> Repair Instructions >> Seat Back Cover and Pad Replacement - Rear (YC7) >> Removal Procedure

Removal Procedure

  1. Remove the rear bench seat to the vehicle. Refer to Seat Replacement - Rear Bench (2001)  or Seat Replacement - Rear Bench (2002)  .
  2. Remove the rear seat headrest. Refer to Head Restraint Replacement (YC6)  or Head Restraint Replacement (YC7)  .
  3. Remove the rear seat armrests. Refer to Armrest Replacement - Rear Seat (YC5 and YC6)  or Armrest Replacement - Rear Seat (YC7)  .
  4. Remove the J-hook along the bottom edge of the seat back.
  5. Separate the J-hook fasteners that retain the sea back cover to the pad along the seat back break line.
  6. Remove the seat back cover and pad from the seat back.
  7. Remove the pad from the seat back frame. See Fig 1.
  8. Fig 1: Removing/Installing Seat Back Frame Pad
    G00377234Courtesy of GENERAL MOTORS CORP.