LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Astro Van Passenger, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat System >> Repair Instructions >> Seat Back Cover and Pad Replacement (YC5 and YC6) >> Installation Procedure

Installation Procedure

  1. Install the seat back cover to the pad. See Figure.
    NOTE: Install the hog rings that retain the seat back cover to the pad in the locations noted during disassembly.
  2. Install the hog rings to seat back cover to the pad. See Figure.
  3. Install the seat back and pad to the seat back frame. See Figure.
  4. Connect the J-hook fasteners at the bottom corner of the seat back.
  5. Install the armrests. Refer to Armrest Replacement (YC7)  or Armrest Replacement (YC6)  .
  6. Install the bucket seat in the vehicle. Refer to Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals