Removal Procedure
- Remove the rear bench seat from the vehicle. Refer to Seat Replacement - Rear Bench (2001) or Seat Replacement - Rear Bench (2002) .
- Fold down the seat back.
- Remove the upper and lower seat back latch and seat back hinge trim. Refer to Seat Back Hinge Trim Replacement - Rear Left and Seat Back Hinge Trim Replacement - Rear Right (YC6) .
- Unzip the seat back cover. See Figure.
- Reach inside the seat back and remove the armrest retaining clip from the stud.
- Remove the armrest from the seat back. See Figure.
- Remove the armrest cover for cleaning or replacement, if needed:
- Unzip the cover.
- Slide the cover off the armrest.