LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture LT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Display And Gauge System - Analog >> Removal & Installation >> Driver Information Center >> Removal & Installation

Removal & Installation

  1. Turn ignition switch to OFF position. Insert a small, flat-bladed tool between interior light/multifunction switch/reading light housing and overhead console. Press inward and down in order to release interior light/multifunction switch/reading light housing from overhead console. Remove interior light/multifunction switch/reading light housing from overhead console.
  2. Remove Driver Information Center (DIC)-to-overhead console screws. Remove DIC from overhead console. To install, reverse removal procedure. Calibrate compass (if equipped). See COMPASS CALIBRATION  under PROGRAMMING.
scientia non olet · About LEMON Manuals