LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle -- 4T65-E - Service & Repair >> Repair Instructions >> Transmission Vent Replacement >> Installation Procedure

Installation Procedure

  1. Use a small hammer and a flat-bladed tool and tap down on the transaxle vent seat in order to install the transaxle vent (37).
  2. Install the air cleaner intake duct.
    Fig 1: Installing Transaxle Vent
    G01812534Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals