LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle -- 4T65-E - Service & Repair >> Repair Instructions >> Automatic Transmission Mount Replacement >> Installation Procedure

Installation Procedure

  1. Install the transaxle mount to the transaxle mount frame bracket.
    NOTE: Refer to FASTENER NOTICE
  2. Install the transaxle mount lower nuts to the transaxle mount frame bracket.

    Tighten 

    Tighten the nuts to 47 N.m (35 lb ft).

  3. Install the transaxle mount bracket to the transaxle. Refer to Automatic Transmission Mount Bracket Replacement 
    Fig 1: Installing Transaxle Mount Lower Nuts & Frame Bracket
    G01812639Courtesy of GENERAL MOTORS CORP.