LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column & Steering Column Switches >> Removal & Installation >> MULTIFUNCTION Switch >> Removal

MULTIFUNCTION Switch: Removal

  1. Ensure multifunction switch lever is in center position. Disconnect negative battery cable. Disable air bag system. See appropriate AIR BAG RESTRAINT SYSTEMS article. Remove steering wheel. See STEERING WHEEL . Remove knee bolster, if necessary.
  2. Remove bolts/screws and lower column cover. Remove bolts/screws and upper column cover. Remove lock cylinder, if necessary. See LOCK CYLINDER (FUNCTIONAL) . Remove wiring harness strap. Disconnect steering column harness connectors. Disconnect multifunction switch Gray and Black connectors. Remove multifunction switch from vehicle.
scientia non olet · About LEMON Manuals