LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 979 (Rear Drive Axle) >> Repair Instructions >> Differential Carrier Assembly - Assemble >> Assemble Procedure

Assemble Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Assemble Carrier Assembly
    GM794364Courtesy of GENERAL MOTORS CORP.
  1. Install the side gears, pinion gears (2) and washers (1) into the differential case (3).
  2. Fig 2: Installing Pinion Shaft Pin & Aligned With Hole In Differential Case
    GM748616Courtesy of GENERAL MOTORS CORP.
  3. Install the pinion shaft pin (2) with the hole end aligned with the hole in the differential case (1).
  4. Fig 3: Driving Roll Pin From Location
    GM1306951Courtesy of GENERAL MOTORS CORP.
  5. Drive the roll pin from location (1) through the pinion shaft pin.