Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Clutch Pedal Assembly Nuts From Clutch Pedal Assembly Studs

Courtesy of GENERAL MOTORS CORP.

Remove the nuts from the clutch pedal assembly studs.

Fig 2: Clutch Pedal Retainer

Courtesy of GENERAL MOTORS CORP.

Disconnect the clutch master cylinder pushrod from the clutch pedal, 1st design.

Fig 3: Clutch Master Cylinder & Clutch Pedal Assembly

Courtesy of GENERAL MOTORS CORP.

Disconnect the clutch master cylinder pushrod from the clutch pedal, 2nd design.

Fig 4: Clutch Pedal Position Switch & Clutch Pedal

Courtesy of GENERAL MOTORS CORP.

Remove the clutch position switch from the clutch pedal assembly by sliding it upward.
Remove the bolt from the clutch pedal assembly.