LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 959 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Rear Upper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Upper Garnish Molding
    GM981002Courtesy of GENERAL MOTORS CORP.
  1. Install the rear upper garnish molding to the vehicle.
  2. Push the garnish molding until the fasteners are seated.
  3. Close the lift gate.
scientia non olet · About LEMON Manuals