Race and Bearing Specifications

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Race & Bearing Specifications

Courtesy of GENERAL MOTORS CORP.

Alpha	Ref No.	Component	Outer Diameter Specification		Inner Diameter Specification
Alpha	Ref No.	Component	Metric	English	Metric	English
A	226	Coast Clutch Hub Thrust Washer - Front	62.40 mm	2.456 in	33.30 mm	1.311 in
B	501	Coast Clutch Hub Thrust Washer - Front	77.30 mm	3.043 in	56.50 mm	2.224 in
C	506	Second Clutch Sprag Outer Race Thrust Washer - Front	99.30 mm	3.909 in	56.50 mm	2.224 in
D	519	Front Internal Gear Thrust Bearing	61.95 mm	2.439 in	45.80 mm	1.803 in
D	530	Front Internal Gear Thrust Washer Race - Front	58.00 mm	2.283 in	43.80 mm	1.724 in
E	525	Front Internal Gear Thrust Washer - Front	122.00 mm	4.803 in	115.50 mm	4.547 in
F	529	Front Internal Gear Thrust Bearing	89.00 mm	3.504 in	73.50 mm	2.894 in
G	545	Front Sun Gear Thrust Bearing	38.50 mm	1.516 in	23.00 mm	0.905 in
G	546	Front Sun Gear Thrust Bearing Race - Rear	35.10 mm	1.382 in	23.00 mm	0.905 in
H	535	Rear Internal Gear Thrust Bearing	64.00 mm	2.520 in	46.40 mm	1.827 in
H	543	Front Carrier Thrust Bearing Race - Front	61.00 mm	2.401 in	45.40 mm	1.787 in
I	537	Rear Sun Gear Thrust Bearing Race - Front	74.00 mm	2.913 in	53.00 mm	2.087 in
I	538	Rear Sun Gear Thrust Bearing	65.00 mm	2.559 in	50.00 mm	1.968 in
J	568	Forward Clutch Housing Thrust Bearing Race - Front	41.00 mm	1.614 in	13.50 mm	0.531 in
J	569	Forward Clutch Housing Thrust Bearing	41.70 mm	1.641 in	23.00 mm	0.905 in
J	628	Forward/Direct Clutch Housing Thrust Bearing Race - Rear	41.00 mm	1.614 in	17.30 mm	0.681 in
K	540	Input Shaft Thrust Bearing	43.40 mm	1.709 in	22.05 mm	0.868 in
L	263	Front Differential Transfer Drive Gear Thrust Bearing	71.00 mm	2.795 in	49.10 mm	1.933 in
L	264	Front Differential Transfer Drive Gear Thrust Bearing Washer - Front	71.00 mm	2.795 in	49.00 mm	1.929 in
M	593	1-2 Reverse Internal Gear Front Thrust Bearing	58.10 mm	2.287 in	39.60 mm	1.559 in
N	595	1-2 Reverse Internal Gear Rear Thrust Bearing	57.70 mm	2.272 in	37.00 mm	1.457 in
N	596	1-2 Reverse Internal Gear Shim	57.70 mm	2.272 in	37.00 mm	1.457 in
O	590	1-2 Reverse Carrier Thrust Washer (2)	77.60 mm	3.055 in	66.80 mm	2.630 in