Park Lock Cable Adjustment: Notes

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Releasing The Adjuster Piece

Courtesy of GENERAL MOTORS CORP.

Release the adjuster piece by gently prying up on the adjuster locks and unlocking the tab, indicated by arrows.

Fig 2: Park Lock Cable End Terminal & Control Assembly

Courtesy of GENERAL MOTORS CORP.

Install the park lock cable end terminal on the control assembly aligning the cable fitting to the pin and pushing forward. When installing be sure not to install the cable end fitting on an angle or push down on the cable portion as this may cause cable to misadjust.

Fig 3: Lock Cylinder Bezel & Steering Column Shroud

Courtesy of GENERAL MOTORS CORP.

Remove the lock cylinder bezel from the steering column shroud by carefully prying with a thin bladed screwdriver.