Holding Fixture Installation

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 3289-20 Holding Fixture
J 45159 Holding Fixture. See Special Tools .

Fig 1: View Of Holding Fixture

Courtesy of GENERAL MOTORS CORP.

Install the body of the J 45159 with the two long bolts (1) to the transaxle. See Special Tools .
Loosely install the arm and bolt (2) to the J 45159 body. See Special Tools .

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the arm with the provided shorter bolt (3) to the transaxle.
Tighten: Tighten the J 45159 to 25 N.m (18 lb ft) starting with bolt (3). See Special Tools .
Install the J 45159 in the J 3289-20 . SeeSpecial Tools .