LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 952 (Seat Belts) >> Repair Instructions >> Seat Belt Replacement - Front (Quick Connect) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Depressing Button On Seat Buckle Quick Disconnect Using Flat-Bladed Tool
    GM977256Courtesy of GENERAL MOTORS CORP.
  1. Using a small flat-bladed tool, depress the button on the seat buckle quick disconnect feature while pulling up on the shoulder belt to disengage the shoulder belt from the front seat assembly.
  2. Remove the lower garnish molding from the center pillar. Refer to Garnish Molding Replacement - Center Pillar Lower in Interior Trim.
    3. Fig 2: Retractor Fastener
    GM965575Courtesy of GENERAL MOTORS CORP.
  3. Remove the retractor fastener and remove the retractor.
  4. Remove the shoulder belt webbing retainer by pulling on the retainer while using a flat-bladed tool to disengage the attaching clips.
  5. Remove the shoulder belt from the vehicle.
scientia non olet · About LEMON Manuals