LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 952 (Seat Belts) >> Repair Instructions >> Seat Belt Height Adjuster Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center pillar upper garnish molding. Refer to Garnish Molding Replacement - Center Pillar Lower in Interior Trim.
    2. Fig 1: Shoulder Belt Height Adjuster
    GM964654Courtesy of GENERAL MOTORS CORP.
  2. Remove the fasteners from the shoulder belt height adjuster. Remove the height adjuster.
scientia non olet · About LEMON Manuals