LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 947 (Seats) >> Repair Instructions >> Seat Cushion Cover and Pad Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat assembly. Refer to Seat Replacement - Rear .
    2. Fig 1: Rear Seat Fasteners
    GM977275Courtesy of GENERAL MOTORS CORP.
  2. Remove the anchor bolts from the rear seat buckle.
    3. Fig 2: Seat Cushion Cover & Pad
    GM986588Courtesy of GENERAL MOTORS CORP.
  3. Turn the seat over.
  4. Disengage the cushion drawstring retainers from the rear seat cushion frame.
  5. Disconnect the remaining cushion cover retainers from the rear seat cushion frame.
  6. Feed the anchor through to the top of the seat cushion.
  7. Pull the seat cushion cover and pad over the latch locations.
  8. Remove the seat cushion cover and pad from the frame.
  9. Remove the seat cushion cover from the pad by carefully disengaging the hook and loop fasteners.
scientia non olet · About LEMON Manuals