LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 945 (Door System, Mirror System & Window System) >> Repair Instructions >> Door Handle Pivot Replacement - Outside (Rear Door) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door outer panel. Refer to Outer Door Panel Replacement Rear - Bolt On .
  2. Fig 1: Rear Door Sound Insulator
    GM943710Courtesy of GENERAL MOTORS CORP.
  3. Partially remove the rear door sound insulator.
  4. Fig 2: Disconnecting Outside Handle Rod From Handle Pivot
    GM943407Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the outside handle rod from the door latch clamshell-style clip.
  6. Compress the pin on the handle pivot and remove the pivot and outside handle rod assembly.
  7. Disconnect the outside handle rod from the pivot and remove.