LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 933 (Wiring Systems (General Information)) >> Repair Instructions >> Relay Replacement (Within an Electrical Center) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing A Relay
    GM1261644Courtesy of GENERAL MOTORS CORP.
  1. Remove the electrical center cover.
  2. Locate the relay. Refer to Electrical Center Identification Views  to locate the electrical center where the relay exists.
    3. IMPORTANT:
    • Always note the orientation of the relay.
    • Ensure that the electrical center is secure, as not to put added stress on the wires or terminals.
  3. Remove the relay from the electrical center.
scientia non olet · About LEMON Manuals