LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Air Bag Restraint Systems) >> Disabling & Activating Air Bag System >> Activating System

Activating System

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure ignition is off. Connect passenger side impact air bag module connector and install Connector Position Assurance (CPA) clip. See Figure. Connect passenger-side seat belt pretensioner connector and install CPA clip. Connect driver side impact air bag module connector and install CPA clip. Connect driver-side seat belt pretensioner connector and install CPA clip.
  2. Connect passenger-side air bag module connector and install CPA clip. See Figure. Connect driver-side air bag module connector and install CPA clip. See Figure. Install knee bolsters.
  3. Install SIR fuse in fuse block. Check system for proper operation. See SYSTEM OPERATION CHECK .
scientia non olet · About LEMON Manuals