LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 924 (Bumpers) >> Repair Instructions >> License Pocket Cover Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front license cover to the front bumper fascia.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the screws to the front license cover.

    Tighten 

    Tighten the license plate cover screws to 2 N.m (18 lb in).

    Fig 1: Front License Cover
    G01616841Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals