LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 920 (Body Rear End) >> Repair Instructions >> Wiring Harness Replacement - Rear Compartment Lid >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use mechanics wire to attach to the wiring harness and pull the wiring harness through the rear compartment lid.
  2. Connect the wiring harness connectors to the electrical components that are attached to the rear compartment lid.
  3. Connect the wiring harness retainers to the rear compartment lid and in the rear compartment.
  4. Connect the wiring harness in the rear compartment.
  5. Close the rear compartment.
    Fig 1: Rear Compartment Lid Wiring Harness
    G01617514Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals