LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 912 (Power Seat System) >> Repair Instructions >> Seat Riser Lock-Out Pin Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lock-out pins to the front legs of the seat riser.
  2. Install the rear seat. Refer to Seat Replacement - Rear .
    Fig 1: Installing Lock-Out Pins To Front Legs Of Seat Riser
    G01814452Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals