Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear seat to the vehicle.
- Secure the front seat riser latches into the floor. Ensure that the latch is secured on both pins.
- Tilt the rear seat assembly down and latch the rear seat riser latches into the floor.
- Tilt the rear seat back upright.
- Return the rear seat to its original position.