LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 912 (Power Seat System) >> Repair Instructions >> Seat Cushion Pad Replacement - Rear (AM9 50/50 Split Bench) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear seat cushion pad to the rear seat cushion frame.
  2. Install the rear seat cushion cover. Refer to Seat Cushion Cover Replacement - Rear (AQ4 - Captains Chair)  or Seat Cushion Cover Replacement - Rear (AL4 - Rear Bucket)  or Seat Cushion Cover Replacement - Rear (AT5 - 60/40 Split Bench)  or Seat Cushion Cover Replacement - Rear (AM9 - 50/50 Split Bench) .
    Fig 1: Installing Rear Seat Cushion Pad To Rear Seat Cushion Frame
    G01814384Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals