LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 912 (Power Seat System) >> Repair Instructions >> Head Restraint Cover Replacement - Front Seat >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the head restraint cover.
  2. Connect the J and arrow retainers at the bottom of the cover.
  3. Return the head restraint to its original position.
    Fig 1: Installing Head Restraint Cover
    G01814324Courtesy of GENERAL MOTORS CORP.