LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 912 (Power Seat System) >> Repair Instructions >> Cupholder Replacement - Rear Seat >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fold the cup holder to its open position.
  2. Remove the cup holder screws.
  3. Remove the cup holder.
    Fig 1: Removing Cup Holder & Screws (Rear Seat)
    G01814443Courtesy of GENERAL MOTORS CORP.