Removal Procedure
WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- Recline the seat back to a full upright position.
- Remove the front seat. Refer to Seat Replacement - Bucket .
- Remove the J retainer from the bottom edge of the seat back trim cover.
- Reach underneath the trim cover.
- Release the C-clip from the armrest pivot shaft while pushing in on the armrest.
- Remove the armrest from the seat.