LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 907 (Seat Belt System) >> Repair Instructions >> Seat Belt Replacement - Center Rear (50/50 Split Bench) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat. Refer to SEAT REPLACEMENT - REAR .
  2. Remove the recliner trim cover. Refer to SEAT BACK RECLINER COVER REPLACEMENT - REAR .
  3. Remove the rear seat riser. Refer to SEAT RISER REPLACEMENT - REAR .
  4. Remove the seat cushion cover retainers (1) from the bottom of the seat frame.
  5. Remove the bolts securing the center buckle belts from the seat cushion frame.
  6. Remove the center buckle belts from the seat.
    Fig 1: Removing Seat Cushion Cover & Retainers
    G01814693Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals