Conditions for Setting the DTC
WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
- DTC B0057 will set when the seat belt pretensioner-RF deployment loop resistance is less than 1.3 ohms for 500 milliseconds.
- DTC B0058 will set when one of the following conditions occurs:
- Seat belt pretensioner-RF high circuit is less than 2.4 volts and the seat belt pretensioner-RF deployment loop is more than 6 ohms for 500 milliseconds.
- Seat belt pretensioner-RF deployment loop resistance is more than 4.8 ohms for 500 milliseconds.
- DTC B0059 when one of the following conditions occur:
- Seat belt pretensioner-RF high circuit is more than 6 volts for 500 milliseconds.
- Seat belt pretensioner-RF high circuit is less than 2.4 volts and seat belt pretensioner-RF deployment loop resistance is less than 6 ohms for 500 milliseconds.