Removal Procedure
WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rubber conduit. Refer to RUBBER CONDUIT REPLACEMENT - FRONT DOOR .
- Remove the trim panel. Refer to TRIM PANEL REPLACEMENT - SIDE REAR DOOR .
- Remove the water deflector. Refer to WATER DEFLECTOR REPLACEMENT - REAR DOOR .
- Remove the rear door inner sealing strip. Refer to SEALING STRIP REPLACEMENT - REAR DOOR WINDOW BELT INNER .
- Remove the rear door outer sealing strip. Refer to SEALING STRIP REPLACEMENT - REAR DOOR WINDOW BELT OUTER .
- Remove the stationary window molding.
- Remove the rear door frame molding. Refer to GARNISH MOLDING REPLACEMENT - REAR DOOR FRAME .
- Remove the window. Refer to WINDOW REPLACEMENT - REAR DOOR .
- Remove the outside door handle. Refer to DOOR HANDLE REPLACEMENT - REAR OUTSIDE .
- Remove the inside door handle. Refer to DOOR HANDLE REPLACEMENT - REAR INSIDE .
- Remove the lock. Refer to LOCK REPLACEMENT - REAR DOOR .
- Remove the door window weatherstrip. Refer to WEATHERSTRIP REPLACEMENT - REAR DOOR WINDOW .
- Remove the window regulator. Refer to WINDOW REGULATOR REPLACEMENT - REAR DOOR .
- Disconnect the wiring harness.
- Support the door.
- Remove the intermediate door hinge bolts (1).
- Remove the door.