LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Engine Controls - Removal, Overhaul & Installation) >> Ignition Systems >> Camshaft Position Sensor (3.0L) >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Turn OFF the ignition. Disconnect Camshaft Position (CMP) sensor harness connector. See Figure . Remove knock sensor 2 pigtail from attachment clip. Remove CMP sensor attachment bolt and remove sensor. To install, reverse removal procedure. Tighten CMP sensor bolt to specification. See TORQUE SPECIFICATIONS  .

scientia non olet · About LEMON Manuals