LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Engine Controls - Removal, Overhaul & Installation) >> Engine Sensors & Switches >> Manifold Absolute Pressure Sensor (2.2L) >> Removal

Manifold Absolute Pressure Sensor (2.2L): Removal

WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect Intake Air Temperature (IAT) sensor connector. Loosen clamp at air cleaner assembly. Remove push-pin attachment from outlet resonator/duct assembly to support bracket. Loosen clamp at throttle body assembly. Disconnect the PCV fresh air vent hose at cam cover.
  2. Remove outlet resonator/duct assembly. Disconnect MAP sensor electrical connector. See Figure . Remove MAP sensor and the MAP sensor port seal if it is still retained in the intake manifold.