LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 898 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Trim Plate Replacement - Instrument Panel (I/P) Accessory >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the screws from the bottom of the I/P accessory trim plate.
    Fig 1: Removing I/P Accessory Trim Plate & Mounting Bolts
    G01587460Courtesy of GENERAL MOTORS CORP.
  2. Pull the I/P accessory trim plate rearward in order to release the retaining clips.
  3. Rotate the I/P accessory trim plate rearward and up in order to release the 2 tabs at the top edge.
  4. Disconnect the ash tray harness electrical connector from the I/P harness.
  5. Remove the I/P accessory trim plate.
scientia non olet · About LEMON Manuals