LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 898 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Filler Panel Replacement - Outer - Instrument Panel (I/P) Lower Trim >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lower pillar garnish molding. Refer to GARNISH MOLDING REPLACEMENT - LOWER PILLAR in Interior Trim.
    Fig 1: Removing Lower Pillar Garnish Molding & Mounting Bolt
    G01587464Courtesy of GENERAL MOTORS CORP.
  2. Open the instrument panel (I/P) compartment door.
  3. Remove the filler panel bolt.
  4. Starting at the top of the filler panel, pull rearward to release the top retainer.
  5. Pull the bottom of the filler panel straight out to release the final retainer.
  6. Remove the filler panel.
    Fig 2: Removing Filler Panel
    G01587465Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals