LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 896 (Bumper System) >> Repair Instructions >> Fascia Replacement - Front Bumper (Chevrolet) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove both of the front tire and wheels. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .
  3. Remove the right and left front fender liner. Refer to FENDER LINER REPLACEMENT .
  4. Remove the front park/turn signal/side marker lamp. Refer to PARK/TURN SIGNAL/SIDE MARKER LAMP REPLACEMENT .
  5. Use the J 38778  to remove the push-in retainers from the upper and lower front bumper fascia.
  6. Remove the front bumper fascia from the vehicle.
scientia non olet · About LEMON Manuals