Section 894 (Exterior Trim): Specifications
WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Quarter Wheel Opening Molding Screw | 2 N.m | 18 lb in |
| Grille Center Bolts | 4 N.m | 35 lb in |
| Lower Front Quarter Wheel Opening Molding Screw | 2 N.m | 18 lb in |
| Lower Quarter Wheel Opening Molding Retainer Nut | 2 N.m | 18 lb in |
| Lower Rear Fender Wheel Opening Molding Screw | 2 N.m | 18 lb in |
| Rear Rocker Molding Retainer Nut | 2 N.m | 18 lb in |
| Rear Quarter Molding Screw | 2 N.m | 18 lb in |