LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 894 (Exterior Trim) >> Repair Instructions >> Decal and Stripe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the necessary molding and trim panel.
  2. Wash and clean the following items using Liquid Wash and Wax GM P/N 1052870 or the equivalent:
    • The repair surfaces
    • The adjacent panel
    • The openings
  3. Remove the following components:
    • The molding attaching clips
    • The handles
    • The sidemarker reflector
    • Other stripe or decal overlapping parts
    NOTE: To avoid damaging the paint finish, do not use pointed or sharp instruments to remove the stripe or the decal
  4. Use heat in order to remove the stripe or decal. Start at edge and peel the stripe or decal from the panel surface.
  5. Remove all traces of adhesive residue from the painted surfaces using the following items:
scientia non olet · About LEMON Manuals