LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 888 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Rotating the Engine for Service Access

Rotating the Engine for Service Access

WARNING: This page is about a different car, the 2003 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required 

J 41131  Engine Tilt Strap. See Special Tools and Equipment .

  1. Remove the air cleaner intake duct. Refer to AIR CLEANER INTAKE DUCT in Removal & Installation - A/T.
  2. Apply the parking brake.
  3. Put the transaxle in the Neutral position.
  4. Remove the engine mount struts. Refer to ENGINE MOUNT STRUT REPLACEMENT - RIGHT  and ENGINE MOUNT STRUT REPLACEMENT - LEFT  .
  5. Install the J 41131  (2) to the engine mount strut bracket (1) and the upper radiator support (3).
    Fig 1: Installing Engine Tilt Strap To Engine Mount Strut Bracket & Upper Radiator Support
    G01969298Courtesy of GENERAL MOTORS CORP.
  6. Rotate the engine forward for component access.
scientia non olet · About LEMON Manuals