LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 879 (HVAC Systems - Manual) >> Repair Instructions >> HVAC Control Vacuum Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel accessory trim plate. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY in Instrument Panel, Gages and Console.
  2. Remove the screws from the HVAC control module.
    Fig 1: Removing/Installing HVAC Control Module & Retaining Screws
    G01568906Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connectors from the HVAC control module.
  4. Disconnect the vacuum connectors from the HVAC control vacuum valve.
  5. Remove the HVAC control module from the instrument panel.
  6. Remove the vacuum valve from the HVAC control module.
scientia non olet · About LEMON Manuals