Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
Important: If a new sunshade is being installed, align the sunshade in the same position as the old sunshade. If the sunshade is aligned incorrectly, the sunshade will not be properly retained.
- Install the sunshade to the roof.
- Connect the electrical connectors to the sunshade, if equipped with a vanity mirror.
- Push upwards in order to engage the sunshade to the roof.NOTE: Refer to FASTENER NOTICE .
- Install the screw to the sunshade mounting plate.
Tighten
Tighten the screw to 2 N.m (18 lb in).