LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 873 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Windshield Pillar >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the windshield garnish molding from the A-pillar in order to disengage the retaining tabs and clips.
  2. Remove the windshield garnish molding from the A-pillar.
    Fig 1: Removing Windshield Garnish Molding
    G01814498Courtesy of GENERAL MOTORS CORP.