LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 873 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Windshield Pillar >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the windshield garnish molding to the headliner and the holes in the A-pillar.
  2. Press on the windshield garnish molding in order to engage the retaining tabs and clips.
    Fig 1: Installing Windshield Garnish Molding
    G01814499Courtesy of GENERAL MOTORS CORP.