LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 873 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Sliding Door >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the sliding door garnish molding clips to the holes in the sliding door.
  2. Install the sliding door garnish molding to the sliding door.
  3. Firmly press the sliding door garnish molding in order to secure the clips to the holes in the door.
    Fig 1: Installing Sliding Door Molding
    G01814458Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals