Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.

Insert a small, flat-bladed tool between the interior lamp/multifunction switch/reading lamp housing and the overhead console.
Press inward and down in order to release the interior lamp/multifunction switch/reading lamp housing from the overhead console.

Fig 1: Removing Interior Lamp/Multifunction Switch/Reading Lamp Housing Using A Flat-Bladed Tool (CF5)
Courtesy of GENERAL MOTORS CORP.
Remove the interior lamp/multifunction switch/reading lamp housing from the overhead console.

Fig 2: Disconnecting Electrical Connectors From Interior Lamp/Multifunction Switch (CF5)
Courtesy of GENERAL MOTORS CORP.
Disconnect the electrical connectors from the interior lamp/multifunction switch.
Use a flat-bladed tool in order to unsnap the retainers from the overhead console bracket.

Fig 3: Removing Overhead Console From Headliner (CF5)
Courtesy of GENERAL MOTORS CORP.
Remove the overhead console from the headliner.