LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture Base, Van Passenger >> Repair and Diagnosis >> External Pages >> Different car >> Section 868 (Engine Exhaust System) >> Repair Instructions >> Exhaust Hanger Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the catalytic converter hanger.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the catalytic converter hanger bolts.

    Tighten 

    Tighten the catalytic converter hanger bolts to 35 N.m (26 lb ft).

  3. Install the catalytic converter hanger insulators to the catalytic converter.
  4. Lower the vehicle.
    Fig 1: Installing Catalytic Converter Hanger & Bolts
    G01829697Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals